Hardy Racing Engines

  • Home
  • Hardy Racing Engines
Directions

Hardy Racing Engines High Performance Modular Engine Specialist

4.6L getting prepped for sleeves and 9/16 Accufab head studs followed buy fire rings in the heads and receiver grooves i...
16/09/2026

4.6L getting prepped for sleeves and 9/16 Accufab head studs followed buy fire rings in the heads and receiver grooves in the block.

About to build a New engine for Smokey. I picked up a set of GT500 heads and this Roush Yates prototype intake for GT500...
03/09/2026

About to build a New engine for Smokey. I picked up a set of GT500 heads and this Roush Yates prototype intake for GT500 heads on a 4.6L. Still trying to deside if I want to do this or not. It looks bad ass but not sure if it will hold the boost level I'm going to push through it. Here are a few pics of the intake sitting on top of the old engine.

Gen 3 Coyote F-150 engine wrapped up.
03/09/2026

Gen 3 Coyote F-150 engine wrapped up.

GT500 engine completed with custom cams degreed
03/09/2026

GT500 engine completed with custom cams degreed

Built 3v shortblock. Custom JE pistons, Callies Compstar rods, Manley Crank, Clevite H series bearings.
31/07/2026

Built 3v shortblock. Custom JE pistons, Callies Compstar rods, Manley Crank, Clevite H series bearings.

These new Accufab/ARP head studs should provide max clamping power for a Max power 4.6L build. These things are huge 9/1...
31/07/2026

These new Accufab/ARP head studs should provide max clamping power for a Max power 4.6L build. These things are huge 9/16" thick. The pic compairs a standard 4.6L head stud vs These heavy duty studs.

This shortblock is complete. Big bore 3.701 JE pistons, Molnar Power Adder Rods, factory crank, Kings coated XP series b...
09/03/2026

This shortblock is complete. Big bore 3.701 JE pistons, Molnar Power Adder Rods, factory crank, Kings coated XP series bearings.

New high perfomace 4.6L just got completed and is ready to be crated up and shipped out to its owner. This build utilize...
25/06/2025

New high perfomace 4.6L just got completed and is ready to be crated up and shipped out to its owner. This build utilized Modular Head Shop's custom Wiseco competition series pistons, Molnar Power Adder Rods, MHS turbo cams, and Boundary billet 3v oil pump. Accufab 8mm dowl pins and timing gear spacers. Degreed cams to specs. Completely rebuilt the heads with new valve guides, seats, valves, Pac springs & retainers, new lifters and rockers, Also cleaned up the timing and cams cover with a fresh clean powder coating.

17/03/2025

Smokey rolling out. These turbos sound like a Jet spooling up.

This 5.4L is complete and ready to go.
20/02/2025

This 5.4L is complete and ready to go.

Address


Website

Alerts

Be the first to know and let us send you an email when Hardy Racing Engines posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

  • Want your business to be the top-listed autos & automotive service?

Share