TNT Exhaust Systems

Directions Website

TNT Exhaust Systems The passion for cars and what we do is shown in our work and the services we offer.

We have nearly 30 years' experience in the industry, but we still strive to stay up to date with the newest knowledge so that we can give you the best possible service.

Hoekom maak die bends in 'n exhaust saak? šŸ”§'n Exhaust moet deur 'n redelik beperkte spasie onder 'n voertuig pas. Daar i...
02/11/2026

Hoekom maak die bends in 'n exhaust saak? šŸ”§
'n Exhaust moet deur 'n redelik beperkte spasie onder 'n voertuig pas. Daar is enjinonderdele, die chassis, suspension en ander komponente waarvoor plek gemaak moet word. Dis waar die bends inkom.

Maar 'n bend is nie net 'n manier om die pyp om 'n hindernis te kry nie. Die vorm en radius van die draai kan ook die vloei van uitlaatgasse beĆÆnvloed. 'n Baie skerp draai kan meer weerstand veroorsaak as 'n goed ontwerpte, gladde draai.
Die regte ontwerp hang natuurlik ook af van die pyp se deursnee, die enjin en waarvoor die voertuig gebruik word. Dis hoekom 'n exhaust nie net oor hoe dit klink gaan nie. Hoe die pype loop en bymekaar pas, maak ook saak.

Kontak TNT vir 'n sisteem wat gebou is net vir jou voertuig šŸ’„

30/10/2026

šŸ“£28 years calls for something special

ā€¼ļøFrom 26–31 October, we're taking 15% off custom frames and complete exhaust systems ā€¼ļø

That's 15% off the full job.
No complicated conditions.
No lucky draw.
No ā€œup to 15%ā€.
15%.

šŸ‘‰ Six days only šŸ‘ˆ

Can you remember the car you were dropped off in at school back in 1998?Were you one of those kids who could not wait to...
26/10/2026

Can you remember the car you were dropped off in at school back in 1998?

Were you one of those kids who could not wait to be seen in your parents' vehicle, or asked to be dropped off a block before the school gate?

Share your story and photos from 1998?!

šŸ”§ FOR SALE AT TNT WORKSHOP šŸ”§Bakkie frame available for sale!šŸ’„ Strong, practical setup for your bakkie.āž”ļø Price: R17 500šŸ“ž...
23/10/2026

šŸ”§ FOR SALE AT TNT WORKSHOP šŸ”§
Bakkie frame available for sale!

šŸ’„ Strong, practical setup for your bakkie.

āž”ļø Price: R17 500

šŸ“ž Contact TNT for more information or to arrange a viewing.
Francois: 013 282 4313

šŸ”§ Jeep SRT8 branches done by Boeta at TNT.Custom pipework, bends cut and welded, flanges lined up and everything built u...
22/10/2026

šŸ”§ Jeep SRT8 branches done by Boeta at TNT.

Custom pipework, bends cut and welded, flanges lined up and everything built up in the workshop. šŸ’ŖšŸ”„

Another set ready to go!





1998 was a pretty interesting year for exhausts.Ferrari turned up with the F300 and moved the exhausts on their F1 cars....
19/10/2026

1998 was a pretty interesting year for exhausts.

Ferrari turned up with the F300 and moved the exhausts on their F1 cars.
Instead of having the pipes exit underneath the car, they came out through the top of the bodywork alongside the engine. It wasn't just something Ferrari did because it looked different. The position of the exhaust affected the aerodynamics around the back of the car, as well as the way the engine and bodywork were packaged.
And remember, this was a 3.0-litre V10 Formula 1 engine.
The exhaust was part of the whole package.

1998 was also the year TNT started.
So while Ferrari was experimenting with where to put the exhaust on a V10 F1 car, TNT was getting started with performance exhaust systems.

Different cars.
Different budgets.
Same goal - enhanced vehicle performance.

The South African family car in 1998.Toyota Corolla.Toyota Conquest.Citi Golf.Opel Corsa.Kadett.Nissan Sentra.Mazda 323....
15/10/2026

The South African family car in 1998.
Toyota Corolla.
Toyota Conquest.
Citi Golf.
Opel Corsa.
Kadett.
Nissan Sentra.
Mazda 323.
Ford Es**rt.
Honda Ballade.

We'd like to see your means of transport back in 1998?!

šŸ“£28 years calls for something specialā€¼ļøFrom 26–31 October, we're taking 15% off custom frames and complete exhaust syste...
14/10/2026

šŸ“£28 years calls for something special

ā€¼ļøFrom 26–31 October, we're taking 15% off custom frames and complete exhaust systems ā€¼ļø

That's 15% off the full job.
No complicated conditions.
No lucky draw.
No ā€œup to 15%ā€.
15%.

šŸ‘‰ Six days only šŸ‘ˆ

Back in 1998, the TNT name was already known throughout the country for working with performance exhausts, branch manifo...
05/10/2026

Back in 1998, the TNT name was already known throughout the country for working with performance exhausts, branch manifolds and mufflers.

The branch manifolds were designed around gas flow, the flanges were laser cut for accurate fitment, and TNT was already manufacturing its own mufflers.

Fast forward 28 years and things have changed a bit.
Exhausts are still a big part of what we do, but there's a lot more going through the workshop these days.
Custom exhaust systems.
Mine and truck exhausts.
Generator exhausts.
Frames and bars.
Cattle rails.
Game viewing frames.
Roof racks.
Aluminium welding.
Brake skimming.
Custom fabrication.

From 1998 to 2026, the way we enhance vehicle performance improved but our love for a proper car and the sound of a modified exhaust is still the same

Address

241 Cowen Ntuli Street
Middelburg
1050

Opening Hours

Monday 08:00 - 17:00
Tuesday 08:00 - 17:00
Wednesday 08:00 - 17:00
Thursday 08:00 - 17:00
Friday 08:00 - 17:00
Saturday 08:00 - 12:00

Alerts

Be the first to know and let us send you an email when TNT Exhaust Systems posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Nearby autos & automotive services