The Diff Shop

17/10/2026

***Commodore and HSV Owners ***

Have you upgraded hp or been required driveshaft hoops for LVVTA cert

You don’t have to destroy your floor and drill holes anymore plus save hours pulling interior

We have designed a true bolt on solution for these that add safety for driveshaft loop without the need of pulling out the interior and drilling holes for no reason

All that needs to be done is exhaust removal and slight heat shield trimming bolt on the hoops and done we have tested on many brands of exhausts and clear them all so great for any tuning shops to add to their combos as exhaust is already on for the upgrade

These are zinc plated as standard but can be coated in any colour to suit your build for extra

We have these for many other vehicles coming in 2027 and also pro kits that come with a upgraded gearbox crossmember and gearbox upgrade

08/10/2026

It’s not all flash toys getting our attention to detail

Here we have 2 Hilux diffs we are having to rebuilt after their owner bought from somewhere else as a rebuilt unit and failing quickly and then not standing up to back their work

Was easy to see what some of the other suppliers of exchange diff options in Nz don’t treat a rebuild the same as us and why getting from a actual diff rebuilder gets you a lot more for usually very little extra cost

We have all the correct tooling to do the job correctly and we fully strip and check everything every time no guessing plus install upgrades to everything we to build to make it as strong as possible

This is why we offer the best in the industry of up to 24 month and 30,000km warranty for many of exchange options (conditions do apply)

05/10/2026

RX7 diff ready to ship

All the best as usual

KAAZ USA
Our HD bearing set upgrade tied with our billet solid spacer to give as much strength as possible

We can do ratios to suit most engine setups can think of and different l*d options to get all the traction you could ever need

Have options from $3000nzd ready to build to suit your needs

03/10/2026

Custom drop in packages to suit your vehicle

We don’t just sell you a box we design a solution

Not every car just needs a 9”

We find that most cars would benefit from something smaller and more efficient to be able to use your toy more

Even for a lot of smaller cars that the go to was a Hilux we have much better options that are lighter better wheel bearing and brake options

Borg Warner based options are the best option for many of these vehicles

With ratios of 2.77 to 4.11 can be matched to most common engine gearbox and wheel combos

Axles in 28 and 31 spline to handle anything you give it

We have drum and disk brake options to suit 13” up to big 340mm to fill up the 20” wheels

We can supply a drop in package to suit most vehicles with just hook up the brake hose and connect hand brake cable bolt straight in to factory and know you have a rear end you can depend on

Have many great traction options to suit you best

Is it time to sort your rear end for good

Due to our workload we have a wait time so get In touch to get in the queue if needing something this season

*d

02/10/2026

ARB 4x4 Accessories

29/09/2026

28/09/2026

The guys knocking out some more automotive art In the frontline bay

26/09/2026

Saturday race car unit out

Supertourer diff in for a freshen

Rebuild drexler_automotive l*d unit
Reset gears and new solid spacer
Dress up the Strange Engineering alloy race case

25/09/2026

***VE VF COMMODORES OWNERS***

Don’t ignore that clunk in the rear these diffs are very common to fail in the l*d and can totally destroy your diff

Fit one of Diff King distracs and have some peace of mind

We can also offer ratio upgrades to liven up and make your LS sing our most common is 3.7 as a good all round option

We build all our diffs with genuine timken bearings HD solid spacer and machined to size adjustment shims to make as strong and possible

25/09/2026

We are looking for an experienced mechanic/machinist/engine builder to add to busy our team.
Someone who has great time management skills and is looking for some variety as no day is the same!
To work with us you would need to have a love for cars and a great sense of humour plus true attention to details
We are based in Templeton so you get a county feel.
After building up a purpose built work shop for all drivetrain repairs and modifications we have a requirement for another talented person.
This is not an entry level role experience in automotive repair is essential.
Duties would be:
Removing and rebuilding diffs
Manufacturing custom complete rear axles
Race car fabrication and maintenance
Custom work on hot rods
The successful applicant will bring the following to our team:
A proven track record in automotive repairs and services.
A high level of reliability, integrity and professionalism.
Commitment and dedication to finish work to the highest standards.
Clear, concise and confident communication skills.
Ability to work and time manage to a deadline.
Able to work solely or as part of a team.
A full, clean driver license
Pay will depend on the applicants skills and experience.

We are very flexible on work hours for this role to suit your lifestyle so 4 day weeks , part time no problem